Dow ENGAGE HM7387

Dow ENGAGE HM7387 is an ethylene-butene polyolefin elastomer with MFR less than 0.50 g/10 min, density 0.870 g/cm³ and a DSC melting point of 50.0 °C, typically used for SEBS extension and soft-touch compounds.

0.870Density
<0.50Melt Flow Rate (190 °C / 2.16 kg)
50Melting Point

Quick facts

Density0.870
Melt Flow Rate (190 °C / 2.16 kg)<0.50
Melting Point50
Vicat Softening Point46
Glass Transition (Tg)-52
Shore A Hardness66
Tensile Strength9.1
Elongation at Break810
Dow ENGAGE HM7387 | POE Pellets
Dow ENGAGE HM7387 | POE Pellets

ENGAGE™ HM 7387 Polyolefin Elastomer is an ethylene-butene copolymer that has higher molecular weight, better toughness, and higher melt strength than other commercially available polyolefin elastomers. It can serve as an extender for SEBS, impart lower gloss in hard TPOs, provide the basis for flexible soft-touch compounds, and is well suited for extruded applications such as wire and cable.

Why hm7387 and not its siblings

hm7387 is a grade at MFR <0.50 g/10 min, 0.87 g/cm³ density, a butene comonomer, melting point 50 °C, Vicat 46 °C, Tg -52 °C. In the ENGAGE POE line-up this puts it in the very-low-flow, high-melt-strength end. Nearby grades include hm7280 (MFR <0.50, 0.884 g/cm³, Tg -43 °C) and 7270 (MFR 0.8, 0.88 g/cm³, Tg -44 °C).

Choose it where melt strength and toughness matter more than throughput — film extrusion, profile or SEBS extension — and accept the slower flow. All values are typical figures from the Dow ENGAGE technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)<0.50 g/10 min190 °C / 2.16 kg · ASTM D1238
Density0.870 g/cm³ASTM D792
Melting point (Tm)50.0 °CDSC · Dow method
Glass transition temperature (Tg)-52.0 °CASTM D1525
Vicat softening temperature46.0 °CASTM D1525
Peak crystallization temperature38.0 °CDow method
Tensile strength at break9.10 MPaASTM D638
Elongation at break810 %ASTM D638
Flexural modulus (1% secant)12.2 MPaASTM D790
Shore A hardness66 ASTM D2240
Shore D hardness22 ASTM D2240
Tear strength40.6 kN/mASTM D624
Mooney viscosity54 MUASTM D1646
ComonomerButene—

Typical values from the Dow ENGAGE technical data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Polymer modification
  • Extender for SEBS
  • Soft-touch compounds
  • Reduced gloss TPOs
  • Wire and cable
  • Impact modification

Processing

Compounding.

Other ENGAGE grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow published property data for ENGAGE HM7387. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow ENGAGE HM7387 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.