Dow ENGAGE HM7280

Dow ENGAGE HM7280 is an ethylene-butene polyolefin elastomer with MFR less than 0.50 g/10 min, density 0.884 g/cm³ and a DSC melting point of 116 °C, typically used for film extrusion and impact modification of PP and PE.

0.884Density
<0.50Melt Flow Rate (190 °C / 2.16 kg)
116Melting Point

Quick facts

Density0.884
Melt Flow Rate (190 °C / 2.16 kg)<0.50
Melting Point116
Vicat Softening Point60
Glass Transition (Tg)-43
Shore A Hardness84
Tensile Strength5.1
Elongation at Break310
Dow ENGAGE HM7280 | POE Pellets
Dow ENGAGE HM7280 | POE Pellets

ENGAGE™ HM 7280 Polyolefin Elastomer Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity.

Why hm7280 and not its siblings

hm7280 is a grade at MFR <0.50 g/10 min, 0.884 g/cm³ density, a butene comonomer, melting point 116 °C, Vicat 60 °C, Tg -43 °C. In the ENGAGE POE line-up this puts it in the very-low-flow, high-melt-strength end. Nearby grades include hm7289 (MFR <0.50, 0.891 g/cm³, Tg -52.2 °C) and 7270 (MFR 0.8, 0.88 g/cm³, Tg -44 °C).

Choose it where melt strength and toughness matter more than throughput — film extrusion, profile or SEBS extension — and accept the slower flow. All values are typical figures from the Dow ENGAGE technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)<0.50 g/10 min190 °C / 2.16 kg · ASTM D1238
Density0.884 g/cm³ASTM D792
Melting point (Tm)116 °CDSC · Dow method
Glass transition temperature (Tg)-43.0 °CASTM D1525
Vicat softening temperature60.0 °CASTM D1525
Tensile strength at break5.10 MPaASTM D638
Elongation at break310 %ASTM D638
Flexural modulus (1% secant)28.2 MPaASTM D790
Shore A hardness84 ASTM D2240
Shore D hardness29 ASTM D2240
Tear strength46.9 kN/mASTM D624
Mooney viscosity42 MUASTM D1646
ComonomerButene—

Typical values from the Dow ENGAGE technical data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Film extrusion
  • Impact modification of PP and PE
  • Polyolefin blends and compounding

Processing

Film.

Other ENGAGE grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow published property data for ENGAGE HM7280. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow ENGAGE HM7280 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.