Dow ENGAGE 8411

Dow ENGAGE 8411 is an ethylene-octene polyolefin elastomer with MFR 18 g/10 min, density 0.880 g/cm³ and a DSC melting point of 76.0 °C, typically used for automotive TPO and injection moulding.

0.880Density
18Melt Flow Rate (190 °C / 2.16 kg)
76Melting Point

Quick facts

Density0.880
Melt Flow Rate (190 °C / 2.16 kg)18
Melting Point76
Vicat Softening Point45
Glass Transition (Tg)-50
Shore A Hardness81
Tensile Strength7.3
Elongation at Break1000
Dow ENGAGE 8411 | POE Pellets
Dow ENGAGE 8411 | POE Pellets

ENGAGE™ 8411 Polyolefin Elastomer is an ethylene-octene elastomer that offers excellent performance in durable injection molded industrial and consumer goods and compression molded gaskets. ENGAGE 8411 provides high clarity in products requiring visual inspection and allows the use of hot runner molds to enhance production efficiency.

Why ENGAGE 8411 and not its siblings

ENGAGE 8411 sits at MFR 18 g/10 min and 0.880 g/cm³ density with an octene comonomer and a Tg around −50 °C. In the ENGAGE line-up that puts it in the mid-flow, general-purpose injection band: the 8400 / 8401 / 8407 grades run at MFR 30 for faster fill, while 8157 (MFR 0.5, 0.868 g/cm³) and 8180 (MFR 0.5, 0.863 g/cm³) are lower-flow, softer options. Dow positions 8411 for injection-moulded industrial and consumer goods and compression-moulded gaskets, where clarity and hot-runner processing matter.

Choose 8411 when your priority is a balanced octene POE for clarity injection moulding. If you need faster cycle fill, look at 8400 / 8407; if you need a softer, lower-density grade, look at 8157 / 8180. All values are typical data from the Dow ENGAGE technical data sheet — confirm against your spec and the batch COA before ordering.

Key properties

Melt flow rate (MFR)18 g/10 min190 °C / 2.16 kg · ASTM D1238
Density0.880 g/cm³ASTM D792
Melting point (Tm)76.0 °CDSC · Dow method
Glass transition temperature (Tg)-50.0 °CASTM D1525
Vicat softening temperature45.0 °CASTM D1525
Peak crystallization temperature54.0 °CDow method
Tensile strength at break7.30 MPaASTM D638
Elongation at break1000 %ASTM D638
Flexural modulus (1% secant)19.5 MPaASTM D790
Shore A hardness81 ASTM D2240
Shore D hardness27 ASTM D2240
Tear strength47.5 kN/mASTM D624
Mooney viscosity3 MUASTM D1646
ComonomerOctene—

Typical values from the Dow ENGAGE technical data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Automotive Thermoplastic Olefins (TPO)
  • Injection molding
  • Industrial and consumer goods
  • Compression molded gaskets

Processing

Injection.

Other ENGAGE grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow published property data for ENGAGE 8411. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow ENGAGE 8411 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.