Dow ENGAGE 8130

Dow ENGAGE 8130 is an ethylene-octene polyolefin elastomer with MFR 13 g/10 min, density 0.864 g/cm³ and a DSC melting point of 56.0 °C, typically used for impact modification of PP and PE and hygiene applications.

0.864Density
13Melt Flow Rate (190 °C / 2.16 kg)
56Melting Point

Quick facts

Density0.864
Melt Flow Rate (190 °C / 2.16 kg)13
Melting Point56
Glass Transition (Tg)-55
Shore A Hardness63
Tensile Strength2.4
Elongation at Break800
Flexural Modulus7.8
Dow ENGAGE 8130 | POE Pellets
Dow ENGAGE 8130 | POE Pellets

Dow ENGAGE™ 8130 is an ethylene-octene polyolefin elastomer supplied in pellet form. Typical uses listed by the manufacturer include impact modification of PP and PE and hygiene applications.

Why 8130 and not its siblings

8130 is a grade at MFR 13 g/10 min, 0.864 g/cm³ density, an octene comonomer, melting point 56 °C, Tg -55 °C. In the ENGAGE POE line-up this puts it in the high-flow injection / impact-modifier band with a low Tg for low-temperature flexibility. Nearby grades include 8411 (MFR 18, 0.88 g/cm³, Tg -50 °C) and 7447 (MFR 5, 0.865 g/cm³, Tg -53 °C).

Choose it when faster fill or higher throughput is the priority, such as injection molding or impact-modifier masterbatch, and the lower melt strength is acceptable. All values are typical figures from the Dow ENGAGE technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)13 g/10 min190 °C / 2.16 kg · ASTM D1238
Density0.864 g/cm³ASTM D792
Melting point (Tm)56.0 °CDSC · Dow method
Glass transition temperature (Tg)-55.0 °CDow method
Peak crystallization temperature38.0 °CDow method
Tensile strength at break2.40 MPaASTM D638
Elongation at break800 %ASTM D638
Flexural modulus (1% secant)7.80 MPaASTM D790
Shore A hardness63 ASTM D2240
Shore D hardness13 ASTM D2240
Tear strength26.4 kN/mASTM D624
Mooney viscosity4 MUASTM D1646
ComonomerOctene—

Typical values from the Dow ENGAGE technical data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Impact Modification
  • Hygiene

Processing

Injection; Compounding.

Other ENGAGE grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow published property data for ENGAGE 8130. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow ENGAGE 8130 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.