Page

Retort Flexible Packaging Material Solutions

EVOH barrier and tie-layer grade selection for 121 °C retort flexible packaging, with real published grade data and documentation.

发布于 2026-11-14

更新于 2026-11-15

Retort Flexible Packaging Material Solutions

The buyer problem

A retort pouch has to survive 121 °C steam sterilisation and still hold oxygen barrier afterwards. Two failures dominate: barrier loss after retort (EVOH moisture uptake) and delamination at the EVOH interface (wrong or missing tie layer). Both are usually diagnosed as “bad resin” when the real cause is ethylene content choice, layer symmetry, or processing temperature.

What we do: shortlist grades against your actual structure (PE / tie / EVOH / tie / PE or PA-based), check each against the manufacturer's TDS, and confirm lot-specific COA before the order. We are a sourcing and grade-matching partner, not a resin producer.

Typical layer structure

A symmetric structure protects the EVOH from moisture on both sides and gives the tie layers a clean interface to bond:

PE sealantouter / seal
Tie layeradhesive
EVOHbarrier
Tie layeradhesive
PE / PAouter

Structure is illustrative. Final layer order and thickness depend on your line, seal conditions and retort cycle. We confirm against the TDS and your converter's trials.

Grades we can source

Real grades already published on this site. Figures below are the values shown on each product page — blank cells mean no verified value is published, so we leave them as — rather than estimate.

RoleGradeDensity
g/cm³
MFR
g/10 min
Test conditionMelting
°C
Ethylene
EVOH barrierChang Chun EVASIN EV2951F1.203.0210 °C / 2.16 kg18829 mol%
Chang Chun EVASIN EV3251F1.191.6190 °C / 2.16 kg18332 mol%
Chang Chun EVASIN EV3851F1.171.6190 °C / 2.16 kg17338 mol%
Chang Chun EVASIN EV4405F1.145.5190 °C / 2.16 kg16544 mol%
Tie / adhesiveSK BONDINE TX8030 (retort-grade, PA/PE laminate)—————
SK OREVAC 18603 (EVOH / PA barrier film)—————
SK Chemical 18342N – OREVAC0.933.5190 °C / 2.16 kg125—

All values above are reproducible from the linked product pages. Test conditions are shown because MFR is not comparable across different conditions. Indicative only — not a specification or warranty; confirm the current grade data and the batch COA with us before ordering.

Browse all grades → · POE grade finder →

Technical reading

EVOH Retort Sterilisation at 121 °C

Barrier performance after retort and how ethylene content changes the outcome.

EVOH Ethylene Content: 32 vs 44 mol%

Choosing barrier vs processability for a given structure.

EVOH Barrier Resin Selection Guide

Grade shortlisting workflow and data checks.

What Is a Tie-Layer Resin?

Why delamination is often a structure problem, not a resin problem.

Tie-Layer Compound Selection

PE-g-MAH / PP-g-MAH / EAA chemistry comparison.

How to Read a TDS and COA

What to verify before qualifying a lot.

Related project evidence

One published case study is relevant to food-contact flexible structures. We link it as-is and do not claim it as a retort qualification:

FAQ

Which EVOH ethylene content should I use for a 121 °C retort pouch?

It depends on the barrier target, layer symmetry and drying/conditioning after retort. Lower ethylene content gives better dry-barrier but is more moisture-sensitive. Start with the selection guide linked above, then shortlist against the TDS with us.

Do you provide a COA with every shipment?

Yes — the site's quality policy states COA and MSDS ship with every order, with COA issued per lot. See the Quality & Documents page and our TDS policy.

Can you supply samples for line trials?

Send the grade and your structure via the RFQ form; we confirm availability, sample quantity, lead time and the documents that come with the sample.

What are your MOQ, lead time and trade terms?

Published company data: lead time 7–15 days, trade terms FOB / CIF / EXW / DDP, payment T/T or L/C, nearest port Shanghai. MOQ is grade-specific and confirmed at quotation.

Are the grades certified for food contact?

We only state compliance that is backed by a current manufacturer declaration or report, and we provide the document with the quote. If a document is not available for a grade, we say so — we do not infer certification.

Next step

Tell us the layer structure, retort cycle and target shelf life. We shortlist 2–3 grades, confirm each against the manufacturer's TDS, and quote with the documents that will accompany the shipment.

What happens after you enquire: enquiry received → confirmed within 12 hours → grade shortlist and quotation → sample for line trial → COA / TDS / MSDS with the order.

Request grades & TDS for your structure

Related reading: Surlyn Ionomer Grade Map: Sodium vs Zinc Resins — 12 ionomer grades with published density, MFR, melting point and Vicat values.

Need help?

如果你对本页面内容有疑问,欢迎直接联系我们。