Page

Buyer FAQ & Polymer Glossary — Resources

Procurement FAQ and plain-language polymer glossary: MOQ, lead time, documents, MFR, EVOH, POE, tie-layer resins, ionomers and COA/TDS.

发布于 2026-11-19

Buyer FAQ & Polymer Glossary — Resources

Resources — Buyer FAQ & Polymer Glossary

Short answers to the questions procurement and engineering teams ask most, plus plain-language definitions for the terms that come up in a polymer enquiry. For grade-level data, see the Quality & Documents page.

Buyer FAQ

What is your minimum order quantity?

MOQ is flexible — from a trial lot (a few kilograms for most grades) up to full containers. Feasibility is confirmed per grade, because some grades are supplied from stock and others are produced to order. MOQ, samples and freight explained →

What is the lead time?

Typically 7–15 days after order confirmation, depending on grade and whether it is in stock. Stocked grades ship sooner; produced-to-order grades take the longer end of the range.

What payment terms do you accept?

T/T or L/C at sight. Terms are set out in the confirmed proforma invoice.

Can I get samples before ordering?

Yes. Samples are dispatched after confirmation, freight collect. Tell us the grade and the test you plan to run and we will confirm what can be supplied. How samples work →

What documents come with a shipment?

A batch COA with every shipment; TDS, MSDS/SDS on request; packing list and commercial invoice for clearance; certificate of origin on request. See Quality & Documents.

Which certifications do your grades hold?

We list only certifications and test reports backed by a current document, with scope and report number shown. Ask for the exact grade and destination market — a report for one material does not transfer to another. The five compliance tests buyers ask for →

How do you handle a quality claim?

Notify us promptly on arrival with the batch COA and photos. We trace the batch to the producer lot and arrange replacement or credit on confirmed non-conformity, per the agreed terms of sale.

Do you provide technical support?

Yes — processing windows, grade shortlisting and troubleshooting on delamination, impact or barrier issues. Start with the relevant guide: EVOH selection, tie-layer resins or reading a TDS/COA.

Polymer Glossary

Plain-language definitions for the terms that come up most in a polymer enquiry. Each term links to a deeper guide where you need one.

MFR / MFI — melt flow rate

Grams of polymer flowing through a standard die in 10 minutes under a stated temperature and load (for example 230 °C / 2.16 kg). Always quote the test condition — the same number at a different load means something else. Read a TDS →

EVOH — ethylene vinyl alcohol

A barrier resin used in multilayer packaging to block oxygen. The ethylene content (mol%) sets the trade-off: lower ethylene = higher barrier but narrower processing window and higher melting point. 32 vs 44 mol% explained →

POE / OBC

Polyolefin elastomer / olefin block copolymer — impact modifiers and sealants used in TPO compounds, film and cable. POE selection →

Tie-layer resin

A maleic-grafted adhesive that bonds polyolefin layers (PE/PP) to polar layers such as PA or EVOH in a coextruded structure. How tie-layers work →

Ionomer

An ethylene-acid copolymer partially neutralised with sodium, zinc or lithium ions (e.g. Surlyn). Used for sealing layers, impact modification and golf-ball covers. Sodium vs zinc grades →

COA / TDS

COA = certificate of analysis, the measured values for a specific production batch. TDS = technical data sheet, the typical values for a grade. The COA governs a shipment; the TDS is a guide. Why the difference matters →

Need a grade recommendation?

Send your application, target property and destination market — we shortlist grades against current TDS data.

Talk to an engineer →

Need help?

如果你对本页面内容有疑问,欢迎直接联系我们。