Dow ENGAGE 8842

Dow ENGAGE 8842 is an ethylene-octene polyolefin elastomer with MFR 1.0 g/10 min, density 0.857 g/cm³ and a DSC melting point of 38.0 °C, typically used for impact modification of PP and PE and hygiene applications.

0.857Density
1Melt Flow Rate (190 °C / 2.16 kg)
38Melting Point

Quick facts

Density0.857
Melt Flow Rate (190 °C / 2.16 kg)1
Melting Point38
Glass Transition (Tg)-58
Shore A Hardness54
Tensile Strength3
Elongation at Break1200
Flexural Modulus4.5
Dow ENGAGE 8842 | POE Pellets
Dow ENGAGE 8842 | POE Pellets

Dow ENGAGE™ 8842 is an ethylene-octene polyolefin elastomer supplied in pellet form. Typical uses listed by the manufacturer include impact modification of PP and PE and hygiene applications.

Why 8842 and not its siblings

8842 is a grade at MFR 1 g/10 min, 0.857 g/cm³ density, an octene comonomer, melting point 38 °C, Tg -58 °C. In the ENGAGE POE line-up this puts it in the low-flow film and extrusion band with a low Tg for low-temperature flexibility. Nearby grades include 8003 (MFR 1, 0.885 g/cm³, Tg -46 °C) and 8450 (MFR 3, 0.902 g/cm³, Tg -32 °C).

Choose it as a general POE for impact modification or compounding where a balanced flow/flexibility combination is wanted. All values are typical figures from the Dow ENGAGE technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)1.0 g/10 min190 °C / 2.16 kg · ASTM D1238
Density0.857 g/cm³ASTM D792
Melting point (Tm)38.0 °CDSC · Dow method
Glass transition temperature (Tg)-58.0 °CDow method
Peak crystallization temperature20.0 °CDow method
Tensile strength at break3.00 MPaASTM D638
Elongation at break1200 %ASTM D638
Flexural modulus (1% secant)4.50 MPaASTM D790
Shore A hardness54 ASTM D2240
Shore D hardness11 ASTM D2240
Tear strength25.4 kN/mASTM D624
Mooney viscosity25 MUASTM D1646
ComonomerOctene—

Typical values from the Dow ENGAGE technical data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Impact Modification
  • Hygiene

Processing

Injection; Compounding.

Other ENGAGE grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow published property data for ENGAGE 8842. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow ENGAGE 8842 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.