Dow ENGAGE 8180

Dow ENGAGE 8180 is an ethylene-octene polyolefin elastomer with MFR 0.50 g/10 min, density 0.863 g/cm³ and a DSC melting point of 47.0 °C.

0.863Density
0.5Melt Flow Rate (190 °C / 2.16 kg)
47Melting Point

Quick facts

Density0.863
Melt Flow Rate (190 °C / 2.16 kg)0.5
Melting Point47
Vicat Softening Point41
Glass Transition (Tg)-55
Shore A Hardness63
Tensile Strength6.3
Elongation at Break910
Dow ENGAGE 8180 | POE Pellets
Dow ENGAGE 8180 | POE Pellets

Dow ENGAGE™ 8180 is an ethylene-octene polyolefin elastomer supplied in pellet form. Contact us for grade selection support on this grade.

Why 8180 and not its siblings

8180 is a grade at MFR 0.5 g/10 min, 0.863 g/cm³ density, an octene comonomer, melting point 47 °C, Vicat 41 °C, Tg -55 °C. In the ENGAGE POE line-up this puts it in the very-low-flow, high-melt-strength end with a low Tg for low-temperature flexibility. Nearby grades include 8677 (MFR 0.5, 0.87 g/cm³, Tg -65 °C) and 8440 (MFR 1.6, 0.897 g/cm³, Tg -33 °C).

Choose it where melt strength and toughness matter more than throughput — film extrusion, profile or SEBS extension — and accept the slower flow. All values are typical figures from the Dow ENGAGE technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)0.50 g/10 min190 °C / 2.16 kg · ASTM D1238
Density0.863 g/cm³ASTM D792
Melting point (Tm)47.0 °CDSC · Dow method
Glass transition temperature (Tg)-55.0 °CASTM D1525
Vicat softening temperature41.0 °CASTM D1525
Peak crystallization temperature32.0 °CDow method
Tensile strength at break6.30 MPaASTM D638
Elongation at break910 %ASTM D638
Flexural modulus (1% secant)8.50 MPaASTM D790
Shore A hardness63 ASTM D2240
Shore D hardness16 ASTM D2240
Tear strength32.0 kN/mASTM D624
Mooney viscosity37 MUASTM D1646
ComonomerOctene—

Typical values from the Dow ENGAGE technical data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • EU,No10/2011
  • U.S.FDA177.1520(c)3.2c
  • U.S.FDADMF

Processing

Compounding.

Other ENGAGE grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow published property data for ENGAGE 8180. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow ENGAGE 8180 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.