Borealis Queo 8230

Borealis Queo 8230 is an ethylene-octene plastomer with MFR 30 g/10 min and density 0.882 g/cm³ for compounding and automotive TPO.

0.882Density
30Melt Flow Rate (190 °C / 2.16 kg)
76Melting Point

Quick facts

Density0.882
Melt Flow Rate (190 °C / 2.16 kg)30
Melting Point76
Vicat Softening Point43
Shore A Hardness83
Tensile Strength7
Elongation at Break980
Flexural Modulus22
Borealis Queo 8230 | POE Pellets
Borealis Queo 8230 | POE Pellets

Queo™ 8230 is an ethylene based octene plastomer produced in a solution polymerisation process using a metallocene catalyst. Supplied as free-flowing pellets.

Why 8230 and not its siblings

8230 is a grade at MFR 30 g/10 min, 0.882 g/cm³ density, melting point 76 °C, Vicat 43 °C, an octene comonomer. In the QUEO POE line-up this puts it in the high-flow end of the range. Nearby grades include 0230 (MFR 30, 0.902 g/cm³, melting 97 °C) and 0219 (MFR 19, 0.902 g/cm³, melting 97 °C).

Use it where a very low density and low melting point give soft, efficient impact modification — PP/TPO compounding and flexible seal layers. Move to a higher-density QUEO grade when stiffness and heat resistance matter more than softness. All values are typical figures from the Borealis QUEO technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)30 g/10 min190 °C / 2.16 kg · ISO 1133
Density0.882 g/cm³ISO 1183
Melting point (Tm)76.0 °CDSC · ISO 11357
Vicat softening temperature43.0 °CISO 306/A
Tensile stress at break7.00 MPaISO 527-2/5A
Tensile strain at break980 %ISO 527-2/5A
Flexural modulus22.0 MPaISO 178
Shore hardnessShore A 83ISO 868
Environmental stress crack resistance> 1000 hrASTM D1693B
Brittleness temperature< -76.0 °CASTM D746
ComonomerOctene—

Typical values from the Borealis Queo data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Impact modification of PP
  • Halogen free flame retardant compounds
  • Automotive PP compounds
  • Rotational moulding
  • Extrusion coated structures

Processing

Rotational moulding; Extrusion.

Other Queo grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need Borealis Queo 8230 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.