Borealis Queo 0219

Borealis Queo 0219 is an ethylene-octene plastomer with MFR 19 g/10 min and density 0.902 g/cm³ for compounding and masterbatch carrier.

0.902Density
19Melt Flow Rate (190 °C / 2.16 kg)
97Melting Point

Quick facts

Density0.902
Melt Flow Rate (190 °C / 2.16 kg)19
Melting Point97
Vicat Softening Point71
Tensile Strength13
Elongation at Break930
Flexural Modulus63
ComonomerOctene
Borealis Queo 0219 | POE Pellets
Borealis Queo 0219 | POE Pellets

Queo™ 0219 is an ethylene based octene plastomer produced in a solution polymerisation process using a metallocene catalyst.

Why 0219 and not its siblings

0219 is a grade at MFR 19 g/10 min, 0.902 g/cm³ density, melting point 97 °C, Vicat 71 °C, an octene comonomer. In the QUEO POE line-up this puts it in the high-flow end of the range on the higher-melting, firmer side. Nearby grades include 8210 (MFR 10, 0.882 g/cm³, melting 75 °C) and 0210 (MFR 10, 0.902 g/cm³, melting 97 °C).

Use it as a seal layer in lamination and flexible packaging, where a lower melting point and controlled flow give a reliable seal window. Compare MFR and Vicat before choosing: flow sets throughput, Vicat sets heat resistance. All values are typical figures from the Borealis QUEO technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)19 g/10 min190 °C / 2.16 kg · ISO 1133
Density0.902 g/cm³ISO 1183
Melting point (Tm)97.0 °CDSC · ISO 11357
Vicat softening temperature71.0 °CISO 306/A
Tensile stress at break13.0 MPaISO 527-2/5A
Tensile strain at break930 %ISO 527-2/5A
Flexural modulus63.0 MPaISO 178
Environmental stress crack resistance< 340 hrASTM D1693B
Brittleness temperature< -76.0 °CASTM D746
ComonomerOctene—

Typical values from the Borealis Queo data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Extrusion coated structures
  • High clarity moulded goods
  • Masterbatches and compounds

Processing

Extrusion.

Other Queo grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need Borealis Queo 0219 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.