Borealis Queo 0201FX

Borealis Queo 0201FX is an ethylene-octene plastomer with MFR 1.1 g/10 min and density 0.902 g/cm³ for film and seal layers.

0.902Density
1.1Melt Flow Rate (190 °C / 2.16 kg)
95Melting Point

Quick facts

Density0.902
Melt Flow Rate (190 °C / 2.16 kg)1.1
Melting Point95
Vicat Softening Point80
Tensile Strength33
Elongation at Break710
Flexural Modulus68
Haze4
Borealis Queo 0201FX | POE Pellets
Borealis Queo 0201FX | POE Pellets

Queo™ 0201FX is an ethylene based octene plastomer, produced in a solution polymerisation process using a metallocene catalyst. This grade is intended for use as primary blend partner in high performance seal layers. The additive package is designed to offer improved control of the coefficient of friction of coextruded blown films.

Why 0201fx and not its siblings

0201fx is a grade at MFR 1.1 g/10 min, 0.902 g/cm³ density, melting point 95 °C, Vicat 80 °C, an octene comonomer. In the QUEO POE line-up this puts it in the low-flow end of the range on the higher-melting, firmer side. Nearby grades include 0201 (MFR 1.1, 0.902 g/cm³, melting 97 °C) and 0203 (MFR 3, 0.902 g/cm³, melting 96 °C).

Use it as a seal layer in lamination and flexible packaging, where a lower melting point and controlled flow give a reliable seal window. Compare MFR and Vicat before choosing: flow sets throughput, Vicat sets heat resistance. All values are typical figures from the Borealis QUEO technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)1.1 g/10 min190 °C / 2.16 kg · ISO 1133
Density0.902 g/cm³ISO 1183
Melting point (Tm)95.0 °CDSC · ISO 11357
Vicat softening temperature80.0 °CISO 306/A
Tensile stress at break33.0 MPaISO 527-2/5A
Tensile strain at break710 %ISO 527-2/5A
Flexural modulus68.0 MPaISO 178
Haze4.0 %ASTM D1003A
Environmental stress crack resistance> 1000 hrASTM D1693B
Brittleness temperature< -76.0 °CASTM D746
ComonomerOctene—

Typical values from the Borealis Queo data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Seal layers in food barrier films
  • Laminated structures requiring very high seal integrity
  • High speed FFS films
  • High strength flexible films

Processing

Blown film; Coextrusion.

Other Queo grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need Borealis Queo 0201FX for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.