Borealis Queo 8201

Borealis Queo 8201 is an ethylene-octene plastomer with MFR 1.1 g/10 min and density 0.882 g/cm³ for compounding.

0.882Density
1.1Melt Flow Rate (190 °C / 2.16 kg)
73Melting Point

Quick facts

Density0.882
Melt Flow Rate (190 °C / 2.16 kg)1.1
Melting Point73
Vicat Softening Point50
Shore A Hardness85
Tensile Strength23
Elongation at Break750
Flexural Modulus23
Borealis Queo 8201 | POE Pellets
Borealis Queo 8201 | POE Pellets

Queo™ 8201 is an ethylene based octene plastomer produced in a solution polymerisation process using a metallocene catalyst. Bridging plastic and elastomeric properties, showing excellent polyolefin compatibility and supplied as free flowing pellets, Queo 8201 is a versatile blend partner for other Supplied as free-flowing pellets.

Why 8201 and not its siblings

8201 is a grade at MFR 1.1 g/10 min, 0.882 g/cm³ density, melting point 73 °C, Vicat 50 °C, an octene comonomer. In the QUEO POE line-up this puts it in the low-flow end of the range. Nearby grades include 0201 (MFR 1.1, 0.902 g/cm³, melting 97 °C) and 0203 (MFR 3, 0.902 g/cm³, melting 96 °C).

Use it where a very low density and low melting point give soft, efficient impact modification — PP/TPO compounding and flexible seal layers. Move to a higher-density QUEO grade when stiffness and heat resistance matter more than softness. All values are typical figures from the Borealis QUEO technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)1.1 g/10 min190 °C / 2.16 kg · ISO 1133
Density0.882 g/cm³ISO 1183
Melting point (Tm)73.0 °CDSC · ISO 11357
Vicat softening temperature50.0 °CISO 306/A
Tensile stress at break23.0 MPaISO 527-2/5A
Tensile strain at break750 %ISO 527-2/5A
Flexural modulus23.0 MPaISO 178
Shore hardnessShore A 85ISO 868
Environmental stress crack resistance> 1000 hrASTM D1693B
Brittleness temperature< -76.0 °CASTM D746
ComonomerOctene—

Typical values from the Borealis Queo data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Impact modification of PP
  • Roof coverings
  • Tunnel linings
  • Flexible low voltage insulation
  • Halogen free flame retardant compounds
  • Blow moulded articles
  • Soft foams
  • High strength flexible films

Processing

Blown film.

Other Queo grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need Borealis Queo 8201 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.