Borealis Queo 0201

Borealis Queo 0201 is an ethylene-octene plastomer with MFR 1.1 g/10 min and density 0.902 g/cm³ for film and foam.

0.902Density
1.1Melt Flow Rate (190 °C / 2.16 kg)
97Melting Point

Quick facts

Density0.902
Melt Flow Rate (190 °C / 2.16 kg)1.1
Melting Point97
Vicat Softening Point82
Tensile Strength36
Elongation at Break720
Flexural Modulus72
Haze2
Borealis Queo 0201 | POE Pellets
Borealis Queo 0201 | POE Pellets

Queo™ 0201 is an ethylene based octene plastomer produced in a solution polymerisation process using a metallocene catalyst.

Why 0201 and not its siblings

0201 is a grade at MFR 1.1 g/10 min, 0.902 g/cm³ density, melting point 97 °C, Vicat 82 °C, an octene comonomer. In the QUEO POE line-up this puts it in the low-flow end of the range on the higher-melting, firmer side. Nearby grades include 0201fx (MFR 1.1, 0.902 g/cm³, melting 95 °C) and 0203 (MFR 3, 0.902 g/cm³, melting 96 °C).

Use it as a seal layer in lamination and flexible packaging, where a lower melting point and controlled flow give a reliable seal window. Compare MFR and Vicat before choosing: flow sets throughput, Vicat sets heat resistance. All values are typical figures from the Borealis QUEO technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)1.1 g/10 min190 °C / 2.16 kg · ISO 1133
Density0.902 g/cm³ISO 1183
Melting point (Tm)97.0 °CDSC · ISO 11357
Vicat softening temperature82.0 °CISO 306/A
Tensile stress at break36.0 MPaISO 527-2/5A
Tensile strain at break720 %ISO 527-2/5A
Flexural modulus72.0 MPaISO 178
Haze2.0 %ASTM D1003A
Environmental stress crack resistance> 1000 hrASTM D1693B
Brittleness temperature< -76.0 °CASTM D746
ComonomerOctene—

Typical values from the Borealis Queo data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Seal layers in lamination and flexible barrier films
  • High strength flexible films
  • Heat shrinkable display film
  • Specialty stretch film applications
  • PP film toughness modification
  • Roof coverings
  • Tunnel linings
  • Flexible low voltage insulation

Processing

Blow moulding.

Other Queo grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need Borealis Queo 0201 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.