Borealis Queo 1007

Borealis Queo 1007 is an ethylene-octene plastomer with MFR 6.6 g/10 min and density 0.910 g/cm³ for compounding, protective covers and seal layers.

0.910Density
6.6Melt Flow Rate (190 °C / 2.16 kg)
105Melting Point

Quick facts

Density0.910
Melt Flow Rate (190 °C / 2.16 kg)6.6
Melting Point105
Vicat Softening Point88
Tensile Strength17
Elongation at Break900
Flexural Modulus118
ComonomerOctene
Borealis Queo 1007 | POE Pellets
Borealis Queo 1007 | POE Pellets

Queo™ 1007 is an ethylene based octene plastomer produced in a solution polymerisation process using a metallocene catalyst.

Why 1007 and not its siblings

1007 is a grade at MFR 6.6 g/10 min, 0.91 g/cm³ density, melting point 105 °C, Vicat 88 °C, an octene comonomer. In the QUEO POE line-up this puts it in the higher-flow part of the range on the higher-melting, firmer side with relatively high Vicat heat resistance in the higher-density, higher-heat seal-layer group. Nearby grades include 0207la (MFR 6.6, 0.902 g/cm³, melting 96 °C) and 0219 (MFR 19, 0.902 g/cm³, melting 97 °C).

Use it as a seal layer in lamination and flexible packaging, where a lower melting point and controlled flow give a reliable seal window. Compare MFR and Vicat before choosing: flow sets throughput, Vicat sets heat resistance. All values are typical figures from the Borealis QUEO technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)6.6 g/10 min190 °C / 2.16 kg · ISO 1133
Density0.910 g/cm³ISO 1183
Melting point (Tm)105 °CDSC · ISO 11357
Vicat softening temperature88.0 °CISO 306/A
Tensile stress at break17.0 MPaISO 527-2/5A
Tensile strain at break900 %ISO 527-2/5A
Flexural modulus118 MPaISO 178
Environmental stress crack resistance800 hrASTM D1693B
Brittleness temperature< -76.0 °CASTM D746
ComonomerOctene—

Typical values from the Borealis Queo data sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Seal layers in multi layer barrier films
  • Heat shrinkable film
  • Caps and closures
  • PP toughness modification
  • Compounds
  • Moulded articles

Processing

Blown film; Extrusion.

Other Queo grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need Borealis Queo 1007 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.