Why a Brand Cross-Reference Matters for Tie Layers
In multilayer flexible packaging, the tie-layer resin is the unsung component that bonds an inert barrier (EVOH, PA, PET, aluminium) to a polyolefin sealant. Four supplier families dominate the spec sheet: SK Chemical BONDINE, Dow BYNEL, SK Primacor (ethylene-acrylic-acid / ionomer chemistry), and Sumitomo IGETABOND. They overlap heavily in function, so engineers constantly ask: which grade maps to which, and where do they actually diverge? This cross-reference answers that without inventing numbers we do not have.
The Four Families at a Glance
The table below contrasts one representative grade per family. Where a published typical value exists in our database it is shown; where a grade's full data sheet has not been ingested, the cell reads "—" and the link points to the product page for the complete specification.
| Family / Grade | Supplier | Chemistry | Density (g/cm³) | MFR (g/10 min) | Melting (°C) | Vicat (°C) |
|---|---|---|---|---|---|---|
| BONDINE HX8290 | SK Chemical | Maleic-anhydride-grafted polyolefin tie resin | 0.94 | 70 (190 °C / 2.16 kg) | 85 | 40 |
| BYNEL 21E787 | Dow | Anhydride-modified polyethylene; engineered for PET / PA / EVOH structures | — | — | — | — |
| Primacor IO 3701 | SK (ionomer) | Ethylene-acrylic-acid copolymer / ionomer; strong adhesion to Al, glass, polar surfaces | — | — | — | — |
| IGETABOND BF-7L | Sumitomo | E-GMA-MA impact modifier (ethylene-ethyl acrylate-GMA-MMA); engineered for PPS / PBT compounds | — | — | — | — |
BONDINE HX8290 values are published typicals from the grade data sheet. Full specifications for BYNEL, Primacor and IGETABOND are maintained on each product page.
Chemistry & Substrate Fit
- BONDINE (SK Chemical) — maleic-anhydride-grafted polyolefin. The grafted anhydride reacts with polar layers (EVOH, PA, PET) while the polyolefin backbone co-extrudes with PE/PP. Best for PE–EVOH and PE–PA structures at low-to-mid processing temperatures.
- BYNEL (Dow) — anhydride-modified polyethylene family. Broadest substrate window among the four, explicitly qualified for PET, PA and EVOH tie layers; the workhorse where a single resin must serve mixed line recipes.
- Primacor (ionomer) — EAA chemistry with ionic cross-links. Superior hot-tack and adhesion to aluminium, metallised film and polar surfaces; the default where foil or metallised layers dominate the structure.
- IGETABOND (Sumitomo) — E-GMA-MA, an impact-modifier chemistry rather than a pure film tie. It is the odd one out here: selected when the "tie" requirement is really compatibilisation inside an engineering compound (PPS, PBT), not a flexible film layer.
How to Choose by Structure
| If your structure is… | Start here | Why |
|---|---|---|
| PE / EVOH / PE (standard barrier film) | BONDINE HX8290 or BYNEL 21E787 | MAH / anhydride chemistry bonds EVOH; polyolefin side seals to PE |
| PET / EVOH or PA / EVOH | BYNEL 21E787 | Explicitly qualified for PET and PA tie layers |
| Aluminium foil or metallised layer present | Primacor IO 3701 | Ionomer chemistry adhesives to metal and polar surfaces |
| Engineering compound (PPS / PBT) compatibilisation | IGETABOND BF-7L | E-GMA-MA couples filler / polar phase inside the compound |
Processing Notes
All four are extrusion-grade and run on standard co-extrusion and extrusion-lamination equipment. BONDINE HX8290 processes in the ~85 °C melting range with a 190 °C / 2.16 kg MFR of 70 — typical of a low-melt, high-flow tie that wets thin barrier layers well. BYNEL and Primacor grades should be run per their individual data sheets; resin dryness and melt temperature must be controlled to avoid anhydride / acid-group degradation. IGETABOND is compounded into the host resin rather than co-extruded as a layer.
Related Reading
- What Is a Tie-Layer Resin? Adhesion, Grade Data and How to Specify It — the fundamentals every specifier should know.
- Tie-Layer Compound Selection: PE-g-MAH vs PP-g-MAH vs EAA — choosing the grafting chemistry.
- EAA and EMAA Adhesive Resins: The Quiet Hero of Multilayer Packaging — the acid-copolymer side of the story.
- Tie-Layer & Compatibilizers product hub — every grade we stock.
FAQ
Can I substitute BYNEL for BONDINE directly?
Not blindly. Both are anhydride-functionalised polyolefins and overlap on PE–EVOH, but melt index, substrate qualification (BYNEL is explicitly rated for PET/PA) and supplier qualification status differ. Run a bond-strength check on your exact structure before substitution.
When do I need an ionomer (Primacor) instead of a grafted polyolefin?
When the structure includes aluminium foil, metallised film, or other polar / metallic surfaces where anhydride-grafted polyolefins give weak adhesion. Ionomers give far stronger metal bonding.
Is IGETABOND a film tie layer?
No. It is an E-GMA-MA impact modifier for engineering compounds (PPS, PBT). It appears in the tie/compatibilizer family because it performs a coupling function, but it is compounded into the resin, not co-extruded as a layer.
Where do I get full data sheets for the "—" grades?
Follow the product-page links in the table above. Each page carries the complete specification and source document once ingested.
References
- ASTM D1238 — Standard Test Method for Melt Flow Rates of Thermoplastics.
- ASTM D3418 — Transition Temperatures by Differential Scanning Calorimetry.
- ISO 11357 — Plastics — Differential Scanning Calorimetry (DSC).
- ISO 306 — Plastics — Thermoplastic Materials — Vicat Softening Temperature.
- Supplier technical data sheets: SK Chemical (BONDINE / OREVAC / Primacor), Dow (BYNEL), Sumitomo (IGETABOND).
About this article
Written by the technical team at Shanghai Polyvala Plastics, a sourcing and compounding partner for barrier-film converters since 2013. We cross-reference tie-layer and compatibilizer grades against supplier data sheets and real coextrusion lines, not just datasheets. Looking for an equivalent grade? Request the TDS and COA for any grade linked above, or contact our application engineers for a line-specific recommendation.
Related reading: Surlyn Ionomer Grade Map: Sodium vs Zinc Resins — 12 ionomer grades with published density, MFR, melting point and Vicat values.