TOPAS 6017S-04

TOPAS 6017S-04 COC resin - medical and high-temperature injection-moulded parts.

1.020Density
1.4Melt Flow Rate (260 °C / 2.16 kg)
177.8Vicat Softening Point

Quick facts

Density1.020
Melt Flow Rate (260 °C / 2.16 kg)1.4
Vicat Softening Point177.8
Glass Transition (Tg)177.8
Tensile Strength57.9
Elongation at Break2.4
Light Transmittance91
TOPAS 6017S-04 | COC Resin
TOPAS 6017S-04 | COC Resin

TOPAS 6017S-04 is a COC grade supplied by POLYVALA. Data below is compiled from public manufacturer literature (accessed 2026-10-25); confirm against the latest official TDS before ordering.

Why 6017s-04 and not its siblings

6017s-04 is a grade at MFR 1.4 g/10 min, 1.02 g/cm³ density, Vicat 177.8 °C, Tg 177.8 °C. In the TOPAS COC line-up this puts it in the ultra-high-heat band. Nearby grades include 6015s-04 (MFR 3.6, 1.02 g/cm³, Tg 157.8 °C) and 6013m-07 (MFR 12, 1.02 g/cm³, Tg 142.2 °C).

Choose it where the finished part must survive the highest service temperature; confirm molding conditions against the current TDS because the processing window is narrow. All values are typical figures from the TOPAS technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Glass transition temperature (Tg)178 °C—
Grade / certificationhighest heat medical / injection moulding—

Typical values from public manufacturer literature (accessed 2026-10-25), measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Medical
  • High-temperature injection-moulded parts

Processing

  • Pre-dry: not required (manufacturer: requires no drying; avoid hot storage to prevent pellet blocking) · Barrel: literature example for injection moulding 230/240/250 °C rear/mid/front · Melt: nozzle 250 °C · Pressure / speed: injection pressure 120 MPa, injection speed 100 mm/s
  • Pre-dry: not required · Barrel: extrusion 200–230 °C · Mould: chill roll 70 °C

Other COC grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need TOPAS 6017S-04 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.