TOPAS 8007S-04

TOPAS 8007S-04 COC resin - healthcare, pharmaceutical packaging.

1.010Density
29Melt Flow Rate (260 °C / 2.16 kg)
80Vicat Softening Point

Quick facts

Density1.010
Melt Flow Rate (260 °C / 2.16 kg)29
Vicat Softening Point80
Glass Transition (Tg)77.8
Tensile Strength62.7
Haze1.2
Light Transmittance91
Water Absorption0.01
TOPAS 8007S-04 | COC Resin
TOPAS 8007S-04 | COC Resin

TOPAS 8007S-04 is a COC grade supplied by POLYVALA. Data below is compiled from public manufacturer literature (accessed 2026-10-25); confirm against the latest official TDS before ordering.

Why 8007s-04 and not its siblings

8007s-04 is a grade at MFR 29 g/10 min, 1.01 g/cm³ density, Vicat 80 °C, Tg 77.8 °C. In the TOPAS COC line-up this puts it in the low-Tg, general-purpose optical band. Nearby grades include 8007f-04 (MFR 10.8, 1.01 g/cm³, Tg 77.8 °C) and 8007f-600 (MFR 10.8, 1.01 g/cm³, Tg 77.8 °C).

Choose it when clarity and easy processing at moderate temperature are the priority; move up the Tg range when the part sees higher heat. All values are typical figures from the TOPAS technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Glass transition temperature (Tg)78 °C—
Density1.010 g/cm³—
Light transmittance91(2mm,ISO13468-1)ISO13468-1
Water absorption0.01 (saturated at 23 °C, ISO 62)ISO 62
Water vapour barrierWVP 0.025 g·mm/(m²·d) @23℃85%RH(DIN53122)DIN53122
Chemical resistanceresistant to water, alcohols, acids and alkalis; compatible with olefins—
Dielectric constant2.35(1-10kHz,IEC60250)IEC60250
HDT / Vicat softening temperature[email protected] 75;Vicat B50 80—
Grade / certificationmedical / pharma packaging (high barrier)—

Typical values from public manufacturer literature (accessed 2026-10-25), measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Healthcare
  • Pharmaceutical packaging

Processing

  • Pre-dry: not required (manufacturer: requires no drying; avoid hot storage to prevent pellet blocking) · Barrel: literature example for injection moulding 230/240/250 °C rear/mid/front · Melt: nozzle 250 °C · Pressure / speed: injection pressure 120 MPa, injection speed 100 mm/s
  • Pre-dry: not required · Barrel: extrusion 200–230 °C · Mould: chill roll 70 °C

Other COC grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need TOPAS 8007S-04 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.