TOPAS 5013L-10

TOPAS 5013L-10 COC resin - diagnostic and analytical devices.

1.020Density
43Melt Flow Rate (260 °C / 2.16 kg)
132.8Vicat Softening Point

Quick facts

Density1.020
Melt Flow Rate (260 °C / 2.16 kg)43
Vicat Softening Point132.8
Glass Transition (Tg)133.9
Tensile Strength46.2
Elongation at Break1.7
Haze0.6
Light Transmittance91.4
TOPAS 5013L-10 | COC Resin
TOPAS 5013L-10 | COC Resin

TOPAS 5013L-10 is a COC grade supplied by POLYVALA. Data below is compiled from public manufacturer literature (accessed 2026-10-25); confirm against the latest official TDS before ordering.

Why 5013l-10 and not its siblings

5013l-10 is a grade at MFR 43 g/10 min, 1.02 g/cm³ density, Vicat 132.8 °C, Tg 133.9 °C. In the TOPAS COC line-up this puts it in the high-heat optical band. Nearby grades include 5013f-04 (MFR 8, 1.02 g/cm³, Tg 133.9 °C) and 6013f-04 (MFR 0.9, 1.02 g/cm³, Tg 137.8 °C).

Choose it for high-heat optical parts such as medical or laboratory components; compare Tg and flow together, since heat resistance and moldability move in opposite directions. All values are typical figures from the TOPAS technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Glass transition temperature (Tg)134 °C—
Light transmittancehigh clarity—
Grade / certificationdiagnostic / analytical grade—

Typical values from public manufacturer literature (accessed 2026-10-25), measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Diagnostic
  • Analytical devices

Processing

  • Pre-dry: not required (manufacturer: requires no drying; avoid hot storage to prevent pellet blocking) · Barrel: literature example for injection moulding 230/240/250 °C rear/mid/front · Melt: nozzle 250 °C · Pressure / speed: injection pressure 120 MPa, injection speed 100 mm/s
  • Pre-dry: not required · Barrel: extrusion 200–230 °C · Mould: chill roll 70 °C

Other COC grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need TOPAS 5013L-10 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.