TOPAS 9506F-500

TOPAS 9506F-500 COC resin - shrink film, multilayer film.

1.010Density
5.4Melt Flow Rate (230 °C / 2.16 kg)
63.9Glass Transition (Tg)

Quick facts

Density1.010
Melt Flow Rate (230 °C / 2.16 kg)5.4
Glass Transition (Tg)63.9
Tensile Strength51.7
Elongation at Break3.1
TOPAS 9506F-500 | COC Resin
TOPAS 9506F-500 | COC Resin

TOPAS 9506F-500 is a COC grade supplied by POLYVALA. Data below is compiled from public manufacturer literature (accessed 2026-10-25); confirm against the latest official TDS before ordering.

Why 9506f-500 and not its siblings

9506f-500 is a grade at MFR 5.4 g/10 min, 1.01 g/cm³ density, Tg 63.9 °C. In the TOPAS COC line-up this puts it in the low-Tg, general-purpose optical band. Nearby grades include 8007s-04 (MFR 29, 1.01 g/cm³, Tg 77.8 °C) and 6017s-04 (MFR 1.4, 1.02 g/cm³, Tg 177.8 °C).

Choose it when clarity and easy processing at moderate temperature are the priority; move up the Tg range when the part sees higher heat. All values are typical figures from the TOPAS technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Glass transition temperature (Tg)64 °C—
Density1.010 g/cm³—
Water vapour barriermultilayer barrier layer / blended with PE—
Grade / certificationfilm extrusion / shrink film—

Typical values from public manufacturer literature (accessed 2026-10-25), measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Shrink film
  • Multilayer film

Processing

  • Pre-dry: not required (manufacturer: requires no drying; avoid hot storage to prevent pellet blocking) · Barrel: literature example for injection moulding 230/240/250 °C rear/mid/front · Melt: nozzle 250 °C · Pressure / speed: injection pressure 120 MPa, injection speed 100 mm/s
  • Pre-dry: not required · Barrel: extrusion 200–230 °C · Mould: chill roll 70 °C

Other COC grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need TOPAS 9506F-500 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.