SK Chemical 30BA02 - LOTRYL

SK Chemical 30BA02 (LOTRYL) ethylene butyl acrylate (EBA) copolymer — BA 30%, density 0.94 g/cm3, MFR 2. Supplied by POLYVALA with flexible MOQ and batch certificate.

0.940Density
2Melt Flow Rate (190 °C / 2.16 kg)
75Melting Point

Quick facts

Density0.940
Melt Flow Rate (190 °C / 2.16 kg)2
Melting Point75
Vicat Softening Point41
Tensile Strength6
Elongation at Break850
Flexural Modulus9
SK Chemical 30BA02 - LOTRYL | EMA / EBA Copolymer Pellets
SK Chemical 30BA02 - LOTRYL | EMA / EBA Copolymer Pellets

SK Chemical 30BA02 is a ethylene butyl acrylate (EBA) copolymer supplied by POLYVALA (Shanghai Polyvala Plastics Co., Ltd.), part of the LOTRYL family.

Why 30ba02 and not its siblings

30ba02 is a grade at MFR 2 g/10 min, 0.94 g/cm³ density, melting point 75 °C, Vicat 41 °C. In the EMA / EBA copolymer line-up this puts it in the low-flow end of the range. Nearby grades include 18ma02 (MFR 2, 0.94 g/cm³, melting 83 °C) and tc120exco (MFR 6, 0.943 g/cm³, melting 79 °C).

Match flow to the conversion route: lower-MFR grades suit thicker sections and extrusion where melt strength matters, higher-MFR grades suit coating and high-throughput extrusion. Compare the melting point and Vicat together, because they set the heat-seal and heat-resistance window. All values are typical figures from the EMA / EBA technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.94 g/cm³—
Melt flow rate (MFR)2 g/10 min190 °C / 2.16 kg
Melting point (Tm)75 °C—
Vicat softening temperature41 °C—
Tensile strength6 MPa—
Elongation at break850 %—
Flexural modulus9 MPa—
Comonomer content30 %—

Typical values compiled from manufacturer published data and the grade technical documentation. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Halogen-free flame retardant wire
  • Cable halogen-freecablesheath / insulation preferred base material
  • High filling
  • Flexible
  • Insulation。 high melt-strength heavy film
  • Foaming building waterproofing membrane
  • Automotive interior foaming
  • Cushioning gasket

Processing

Conversion routes listed for this grade include lamination. Confirm the recommended temperature profile against the current official TDS before production.

Other EBA grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data compiled from manufacturer published figures. Full official TDS available on request; we do not host the manufacturer's PDF.

Selection guide: EMA vs EBA Grade Map — compare all LOTRYL and Exxtra grades by MFR and melting point.

Need SK Chemical 30BA02 - LOTRYL for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.