SK Chemical 35BA320T - LOTRYL

SK Chemical 35BA320T (LOTRYL) EBA( - ) — BA 35%, density 0.94 g/cm3, MFR 320. Supplied by POLYVALA with flexible MOQ and batch certificate.

0.940Density
320Melt Flow Rate (190 °C / 2.16 kg)
90Melting Point

Quick facts

Density0.940
Melt Flow Rate (190 °C / 2.16 kg)320
Melting Point90
Vicat Softening Point40
Tensile Strength1.3
Elongation at Break110
Flexural Modulus10
SK Chemical 35BA320T - LOTRYL | EMA / EBA Copolymer Pellets
SK Chemical 35BA320T - LOTRYL | EMA / EBA Copolymer Pellets

SK Chemical 35BA320T is a EBA( - ) supplied by POLYVALA (Shanghai Polyvala Plastics Co., Ltd.), part of the LOTRYL family.

Why 35ba320t and not its siblings

35ba320t is a grade at MFR 320 g/10 min, 0.94 g/cm³ density, melting point 90 °C, Vicat 40 °C. In the EMA / EBA copolymer line-up this puts it in the high-flow end of the range. Nearby grades include 35ba320 (MFR 320, 0.94 g/cm³, melting 65 °C) and en33331 (MFR 330, 0.923 g/cm³, melting 61.7 °C).

Match flow to the conversion route: lower-MFR grades suit thicker sections and extrusion where melt strength matters, higher-MFR grades suit coating and high-throughput extrusion. Compare the melting point and Vicat together, because they set the heat-seal and heat-resistance window. All values are typical figures from the EMA / EBA technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.94 g/cm³—
Melt flow rate (MFR)320 g/10 min190 °C / 2.16 kg
Melting point (Tm)90 °C—
Vicat softening temperature40 °C—
Tensile strength1.3 MPa—
Elongation at break110 %—
Flexural modulus10 MPa—
Comonomer content35 %—

Typical values compiled from manufacturer published data and the grade technical documentation. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Hot-melt adhesive preferred food packaging
  • Hygiene products
  • Bookbinding
  • Medicaltape
  • Automotive interior。 advantage:low odor
  • Fast-melting
  • Initial tack
  • Low-temperature flexible

Processing

Conversion routes listed for this grade include injection moulding. Confirm the recommended temperature profile against the current official TDS before production.

Other EBA grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data compiled from manufacturer published figures. Full official TDS available on request; we do not host the manufacturer's PDF.

Need SK Chemical 35BA320T - LOTRYL for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.