SK Chemical 35BA40 - LOTRYL

SK Chemical 35BA40 (LOTRYL) ethylene butyl acrylate (EBA) copolymer — BA 35%, density 0.94 g/cm3, MFR 40. Supplied by POLYVALA with flexible MOQ and batch certificate.

0.940Density
40Melt Flow Rate (190 °C / 2.16 kg)
66Melting Point

Quick facts

Density0.940
Melt Flow Rate (190 °C / 2.16 kg)40
Melting Point66
Vicat Softening Point40
Tensile Strength2
Elongation at Break600
Flexural Modulus10
SK Chemical 35BA40 - LOTRYL | EMA / EBA Copolymer Pellets
SK Chemical 35BA40 - LOTRYL | EMA / EBA Copolymer Pellets

SK Chemical 35BA40 is a ethylene butyl acrylate (EBA) copolymer supplied by POLYVALA (Shanghai Polyvala Plastics Co., Ltd.), part of the LOTRYL family.

Why 35ba40 and not its siblings

35ba40 is a grade at MFR 40 g/10 min, 0.94 g/cm³ density, melting point 66 °C, Vicat 40 °C. In the EMA / EBA copolymer line-up this puts it in the high-flow end of the range on the lower-melting, more flexible side. Nearby grades include 20ma08 (MFR 8, 0.94 g/cm³, melting 76 °C) and 28ba175 (MFR 175, 0.94 g/cm³, melting 97 °C).

Match flow to the conversion route: lower-MFR grades suit thicker sections and extrusion where melt strength matters, higher-MFR grades suit coating and high-throughput extrusion. Compare the melting point and Vicat together, because they set the heat-seal and heat-resistance window. All values are typical figures from the EMA / EBA technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.94 g/cm³—
Melt flow rate (MFR)40 g/10 min190 °C / 2.16 kg
Melting point (Tm)66 °C—
Vicat softening temperature40 °C—
Tensile strength2 MPa—
Elongation at break600 %—
Flexural modulus10 MPa—
Comonomer content35 %—

Typical values compiled from manufacturer published data and the grade technical documentation. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Hot-melt adhesive preferred substrate high-speed packaging hot-melt adhesive
  • Automotive interior adhesive
  • Label adhesive
  • Medicaltape。with high flow + flexible
  • Achieve rapid coating
  • Low-temperature bonding
  • Strong peel strengthSK Functional Polymer。 efficient engineering-plastic toughening & processing aid PBT
  • ABS toughening

Processing

Contact us for processing guidance and the recommended temperature profile for this grade.

Other EBA grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data compiled from manufacturer published figures. Full official TDS available on request; we do not host the manufacturer's PDF.

Need SK Chemical 35BA40 - LOTRYL for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.