Dow XUS 58705.00

Dow XUS 58705.00 is a developmental POE grade with density 0.868 g/cm³, MFR 0.50 g/10 min (190 °C / 2.16 kg) and glass transition temperature -52.0 °C, typically used for general purpose thermoplastic elastomers.

0.868Density
0.5Melt Flow Rate (190 °C / 2.16 kg)
55Melting Point

Quick facts

Density0.868
Melt Flow Rate (190 °C / 2.16 kg)0.5
Melting Point55
Vicat Softening Point46
Glass Transition (Tg)-52
Shore A Hardness70
Tensile Strength9.5
Elongation at Break810
Dow XUS 58705.00 | Developmental POE Elastomer
Dow XUS 58705.00 | Developmental POE Elastomer

Dow XUS 58705.00 is a developmental / experimental polyolefin elastomer produced by Dow. It is supplied in free-flowing pellet form; the values below are the typical properties published in the manufacturer technical data sheet for this grade. This is a Dow developmental / experimental grade, not a commercial specification — availability and the current data sheet must be confirmed with us before ordering.

Key properties

Density0.868 g/cm³ASTM D792
Melt index (MFR)0.50 g/10 minASTM D1238 (190 °C / 2.16 kg)
Mooney viscosity (ML 1+4, 121 °C)33 MUASTM D1646
Tensile modulus (100% secant)2.60 MPaASTM D638
Tensile strength9.50 MPaASTM D638
Tensile elongation at break810 %ASTM D638
Flexural modulus (1% secant)15.2 MPaASTM D790
Tear strength (Die C)37.3 kN/mASTM D624
Shore A hardness70ASTM D2240
Shore D hardness20ASTM D2240
Glass transition temperature (Tg)-52.0 °CDow Method (DSC)
Vicat softening temperature46.0 °CASTM D1525
Melting temperature (DSC)55.0 °CDow Method (DSC)
Peak crystallization temperature (Tc)42.0 °CDow Method (DSC)

Typical values from the Dow Technical Information sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • General purpose thermoplastic elastomers
  • Impact modification
  • Thermoplastic olefins (TPO)
  • Wire and cable

Processing

Typical conversion routes for Dow XUS 58705.00 include compounding, extrusion, injection moulding and foam processing, depending on the end use. Melt flow rate is measured at 190 °C / 2.16 kg; confirm the recommended processing window against the current official data sheet before production.

Other XUS developmental grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow Technical Information, XUS 58705.00 (developmental / experimental grade, typical values). Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow XUS 58705.00 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.