Dow XUS 38660.00

Dow XUS 38660.00 is a developmental POE grade with density 0.872 g/cm³, MFR 4.8 g/10 min (190 °C / 2.16 kg) and glass transition temperature -53.0 °C, typically used for photovoltaic module encapsulant.

0.872Density
4.8Melt Flow Rate (190 °C / 2.16 kg)
59Melting Point

Quick facts

Density0.872
Melt Flow Rate (190 °C / 2.16 kg)4.8
Melting Point59
Vicat Softening Point37
Glass Transition (Tg)-53
Shore A Hardness66
Tensile Strength5.7
Elongation at Break1100
Dow XUS 38660.00 | Developmental POE Elastomer
Dow XUS 38660.00 | Developmental POE Elastomer

Dow XUS 38660.00 is a developmental / experimental polyolefin elastomer produced by Dow. It is supplied in free-flowing pellet form; the values below are the typical properties published in the manufacturer technical data sheet for this grade. This is a Dow developmental / experimental grade, not a commercial specification — availability and the current data sheet must be confirmed with us before ordering.

Key properties

Density0.872 g/cm³ASTM D792
Melt index (MFR)4.8 g/10 minASTM D1238 (190 °C / 2.16 kg)
Mooney viscosity (ML 1+4, 121 °C)8 MUASTM D1646
Tensile modulus (100% secant)2.30 MPaASTM D638
Tensile strength5.70 MPaASTM D638
Tensile elongation at break1100 %ASTM D638
Flexural modulus (1% secant)10.9 MPaASTM D790
Tear strength (Die C)37.1 kN/mASTM D624
Shore A hardness66ASTM D2240
Shore D hardness17ASTM D2240
Glass transition temperature (Tg)-53.0 °CDow Method (DSC)
Vicat softening temperature37.0 °CASTM D1525
Melting temperature (DSC)59.0 °CDow Method (DSC)
Peak crystallization temperature (Tc)44.0 °CDow Method (DSC)
Volume resistivity>1.0E+16 ohm·cmDow Method

Typical values from the Dow Technical Information sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Photovoltaic module encapsulant

Processing

Typical conversion routes for Dow XUS 38660.00 include compounding, extrusion, injection moulding and foam processing, depending on the end use. Melt flow rate is measured at 190 °C / 2.16 kg; confirm the recommended processing window against the current official data sheet before production.

Other XUS developmental grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow Technical Information, XUS 38660.00 (developmental / experimental grade, typical values). Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow XUS 38660.00 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.