Dow XUS 38661.00

Dow XUS 38661.00 is a developmental POE grade with density 0.880 g/cm³, MFR 18 g/10 min (190 °C / 2.16 kg) and glass transition temperature -50.0 °C, typically used for pV module encapsulant.

0.880Density
18Melt Flow Rate (190 °C / 2.16 kg)
76Melting Point

Quick facts

Density0.880
Melt Flow Rate (190 °C / 2.16 kg)18
Melting Point76
Vicat Softening Point45
Glass Transition (Tg)-50
Shore A Hardness81
Tensile Strength7.3
Elongation at Break1000
Dow XUS 38661.00 | Developmental POE Elastomer
Dow XUS 38661.00 | Developmental POE Elastomer

Dow XUS 38661.00 is a developmental / experimental polyolefin elastomer produced by Dow. It is supplied in free-flowing pellet form; the values below are the typical properties published in the manufacturer technical data sheet for this grade. This is a Dow developmental / experimental grade, not a commercial specification — availability and the current data sheet must be confirmed with us before ordering.

Key properties

Density0.880 g/cm³ASTM D792
Melt index (MFR)18 g/10 minASTM D1238 (190 °C / 2.16 kg)
Mooney viscosity (ML 1+4, 121 °C)3 MUASTM D1646
Tensile modulus (100% secant)3.30 MPaASTM D638
Tensile strength7.30 MPaASTM D638
Tensile elongation at break1000 %ASTM D638
Flexural modulus (1% secant)19.5 MPaASTM D790
Tear strength (Die C)47.5 kN/mASTM D624
Shore A hardness81ASTM D2240
Shore D hardness27ASTM D2240
Glass transition temperature (Tg)-50.0 °CDow Method (DSC)
Vicat softening temperature45.0 °CASTM D1525
Melting temperature (DSC)76.0 °CDow Method (DSC)
Peak crystallization temperature (Tc)54.0 °CDow Method (DSC)
Volume resistivity>1.0E+16 ohm·cmDow Method

Typical values from the Dow Technical Information sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • PV module encapsulant

Processing

Typical conversion routes for Dow XUS 38661.00 include compounding, extrusion, injection moulding and foam processing, depending on the end use. Melt flow rate is measured at 190 °C / 2.16 kg; confirm the recommended processing window against the current official data sheet before production.

Other XUS developmental grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow Technical Information, XUS 38661.00 (developmental / experimental grade, typical values). Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow XUS 38661.00 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.