Wanhua WANSUPER 69147

Wanhua WANSUPER 69147 is a metallocene POE grade with density 0.875 g/cm³, MFR 14 g/10 min (190 °C / 2.16 kg) and glass transition temperature -51 °C, typically used for photovoltaic module encapsulant film.

0.875Density
14Melt Flow Rate (190 °C / 2.16 kg)
57Melting Point

Quick facts

Density0.875
Melt Flow Rate (190 °C / 2.16 kg)14
Melting Point57
Glass Transition (Tg)-51
Shore A Hardness70
Tensile Strength3.3
Elongation at Break800
Flexural Modulus9
Wanhua WANSUPER 69147 | POE Elastomer Pellets
Wanhua WANSUPER 69147 | POE Elastomer Pellets

Wanhua WANSUPER 69147 is a metallocene-catalysed polyolefin elastomer produced by Wanhua Chemical. It is supplied in free-flowing pellet form; the values below are the typical properties published in the manufacturer technical data sheet for this grade.

Why 69147 and not its siblings

69147 is a grade at MFR 14 g/10 min, 0.875 g/cm³ density, melting point 57 °C, Tg -51 °C, an ethylene-butene copolymer. In the WANSUPER POE line-up this puts it in the higher-flow part of the range on the lower-melting, more flexible side in the ethylene-butene sub-family. Nearby grades include 5136 (MFR 13.5, 0.865 g/cm³, melting 59 °C) and 5057 (MFR 5, 0.87 g/cm³, melting 67 °C).

Choose it for PP/TPO impact modification, footwear midsoles or photovoltaic encapsulant film, matching the ethylene-octene or ethylene-butene family to the flexibility you need. Compare Tg and melting point together — a lower Tg keeps the compound flexible at low temperature. All values are typical figures from the Wanhua WANSUPER technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)14 g/10 minASTM D1238 (190 °C / 2.16 kg)
Density0.875 g/cm³ASTM D792
Tensile modulus (100% secant)2 MPaASTM D638
Tensile strength at break3.3 MPaASTM D638
Elongation at break800 %ASTM D638
Flexural modulus (1% secant)9.0 MPaASTM D790
Tear strength (Type C)30 kN/mASTM D624
Shore A hardness70ASTM D2240
Shore D hardness18ASTM D2240
Melting temperature (DSC)57 °CWanhua internal method (DSC)
Glass transition temperature (Tg)-51 °CWanhua internal method (DSC)
Volume resistivity>1.0E+15 ohm·cmIEC 60093

Typical values from the Wanhua Chemical Technical Data Sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Photovoltaic module encapsulant film

Processing

Typical conversion routes for Wanhua WANSUPER 69147 include compounding, extrusion, injection moulding and foam processing, depending on the end use. Melt flow rate is measured at 190 °C / 2.16 kg; confirm the recommended processing window against the current official data sheet before production.

Other WANSUPER grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Wanhua Chemical WANSUPER 69147 Technical Data Sheet (typical values). Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Wanhua WANSUPER 69147 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.