Wanhua WANSUPER 5308

Wanhua WANSUPER 5308 is a metallocene POE grade with density 0.885 g/cm³, MFR 30 g/10 min (190 °C / 2.16 kg) and glass transition temperature -47 °C, typically used for impact modification of PP and TPO.

0.885Density
30Melt Flow Rate (190 °C / 2.16 kg)
80Melting Point

Quick facts

Density0.885
Melt Flow Rate (190 °C / 2.16 kg)30
Melting Point80
Vicat Softening Point50
Glass Transition (Tg)-47
Shore A Hardness84
Tensile Strength9.7
Elongation at Break960
Wanhua WANSUPER 5308 | POE Elastomer Pellets
Wanhua WANSUPER 5308 | POE Elastomer Pellets

Wanhua WANSUPER 5308 is a metallocene-catalysed polyolefin elastomer produced by Wanhua Chemical. It is supplied in free-flowing pellet form; the values below are the typical properties published in the manufacturer technical data sheet for this grade.

Why 5308 and not its siblings

5308 is a grade at MFR 30 g/10 min, 0.885 g/cm³ density, melting point 80 °C, Vicat 50 °C, Tg -47 °C, an ethylene-octene copolymer. In the WANSUPER POE line-up this puts it in the high-flow end of the range. Nearby grades include 69147 (MFR 14, 0.875 g/cm³, melting 57 °C) and 5136 (MFR 13.5, 0.865 g/cm³, melting 59 °C).

Choose it for PP/TPO impact modification, footwear midsoles or photovoltaic encapsulant film, matching the ethylene-octene or ethylene-butene family to the flexibility you need. Compare Tg and melting point together — a lower Tg keeps the compound flexible at low temperature. All values are typical figures from the Wanhua WANSUPER technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Melt flow rate (MFR)30 g/10 minASTM D1238 (190 °C / 2.16 kg)
Density0.885 g/cm³ASTM D792
Tensile modulus (100% secant)3.8 MPaASTM D638
Tensile strength at break9.7 MPaASTM D638
Elongation at break960 %ASTM D638
Tear strength (Type C)51 kN/mASTM D624
Shore A hardness84ASTM D2240
Melting temperature (DSC)80 °CWanhua internal method (DSC)
Vicat softening temperature50 °CASTM D1525
Glass transition temperature (Tg)-47 °CWanhua internal method (DSC)

Typical values from the Wanhua Chemical Technical Data Sheet, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Impact modification of PP and TPO
  • Wire and cable compounds
  • Foamed footwear midsoles
  • TPO compounds

Processing

Typical conversion routes for Wanhua WANSUPER 5308 include compounding, extrusion, injection moulding and foam processing, depending on the end use. Melt flow rate is measured at 190 °C / 2.16 kg; confirm the recommended processing window against the current official data sheet before production.

Other WANSUPER grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Wanhua Chemical WANSUPER 5308 Technical Data Sheet (typical values). Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Wanhua WANSUPER 5308 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.