TOPAS E-140

TOPAS E-140 COC resin - COC toughening modification.

0.940Density
11Melt Flow Rate (260 °C / 2.16 kg)
83.9Melting Point

Quick facts

Density0.940
Melt Flow Rate (260 °C / 2.16 kg)11
Melting Point83.9
Vicat Softening Point63.9
Tensile Strength19.3
Elongation at Break500
TOPAS E-140 | COC Resin
TOPAS E-140 | COC Resin

TOPAS E-140 is a COC grade supplied by POLYVALA. Data below is compiled from public manufacturer literature (accessed 2026-10-25); confirm against the latest official TDS before ordering.

Why e-140 and not its siblings

e-140 is a grade at MFR 11 g/10 min, 0.94 g/cm³ density, melting point 83.9 °C, Vicat 63.9 °C. In the TOPAS COC line-up this puts it in the standard optical grade band. Nearby grades include 9506f-500 (MFR 5.4, 1.01 g/cm³, Tg 63.9 °C) and 8007f-04 (MFR 10.8, 1.01 g/cm³, Tg 77.8 °C).

Compare Tg and MFR together: Tg sets the heat ceiling, MFR sets how easily the part fills the mold. All values are typical figures from the TOPAS technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

HDT / Vicat softening temperatureTm 84 °C—
Grade / certificationtoughening blend—

Typical values from public manufacturer literature (accessed 2026-10-25), measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • COC toughening modification

Processing

  • Pre-dry: not required (manufacturer: requires no drying; avoid hot storage to prevent pellet blocking) · Barrel: literature example for injection moulding 230/240/250 °C rear/mid/front · Melt: nozzle 250 °C · Pressure / speed: injection pressure 120 MPa, injection speed 100 mm/s
  • Pre-dry: not required · Barrel: extrusion 200–230 °C · Mould: chill roll 70 °C

Other COC grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We supply grade data compiled from manufacturer published figures; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Grade data compiled from manufacturer published figures.

Need TOPAS E-140 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.