Dow VERSIFY 4301

Dow VERSIFY 4301 is a propylene-based polyolefin elastomer with density 0.868 g/cm³, MFR 25 g/10 min (230 °C / 2.16 kg) and glass transition temperature -27.0 °C, typically used for soft compounds.

0.868Density
25Melt Flow Rate (230 °C / 2.16 kg)
51Vicat Softening Point

Quick facts

Density0.868
Melt Flow Rate (230 °C / 2.16 kg)25
Vicat Softening Point51
Glass Transition (Tg)-27
Shore A Hardness84
Tensile Strength3.03
Elongation at Break39
Flexural Modulus36
Dow VERSIFY 4301 | Propylene-Based Plastomer Pellets
Dow VERSIFY 4301 | Propylene-Based Plastomer Pellets

Dow VERSIFY 4301 is a propylene-based plastomer / polyolefin elastomer produced by Dow. VERSIFY grades are used as sealant resins, soft-film modifiers and PP impact / softness modifiers; the grade is supplied in free-flowing pellet form. Typical values below are taken from the Dow Technical Information sheet for this grade.

Why 4301 and not its siblings

4301 is a grade at MFR 25 g/10 min, 0.868 g/cm³ density, Vicat 51 °C, Tg -27 °C, a propylene-based plastomer / elastomer copolymer. In the VERSIFY propylene-based elastomer line-up this puts it in the high-flow end of the range. Nearby grades include 4200 (MFR 25, 0.876 g/cm³, melting 84 °C) and 3000 (MFR 8, 0.891 g/cm³, melting 108 °C).

Choose it for PP modification, soft films, sealant layers and overmolding, where a propylene-based elastomer gives flexibility with PP compatibility. Compare Tg and melting point together: Tg sets low-temperature flexibility, the melting point sets the heat-seal and heat-resistance window. All values are typical figures from the Dow VERSIFY technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.868 g/cm³ASTM D792
Melt flow rate (MFR)25 g/10 minASTM D1238 (230 °C / 2.16 kg)
Flexural modulus (1% secant)36.0 MPaASTM D790
Shore A hardness84ASTM D2240
Glass transition temperature (Tg)-27.0 °CDow Method (DSC)
Vicat softening temperature51.0 °CASTM D1525
Haze2.20 %ASTM D1003
Tensile strength at break3.03 MPaASTM D638
Elongation at yield39 %ASTM D638

Typical values from the Dow Technical Information sheet for VERSIFY 4301, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Soft compounds
  • PP modification
  • Blend component for thermoplastic elastomers

Processing

Typical conversion routes for VERSIFY 4301 include blown film, cast film, extrusion, thermoforming and injection moulding. Melt flow rate is measured at 230 °C / 2.16 kg; confirm the recommended processing window against the current official Dow data sheet before production.

Other VERSIFY grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Dow (The Dow Chemical Company) published typical property data for VERSIFY 4301. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Dow VERSIFY 4301 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.