
Dow VERSIFY 3000 is a propylene-based plastomer / polyolefin elastomer produced by Dow. VERSIFY grades are used as sealant resins, soft-film modifiers and PP impact / softness modifiers; the grade is supplied in free-flowing pellet form. Typical values below are taken from the Dow Technical Information sheet for this grade.
Why 3000 and not its siblings
3000 is a grade at MFR 8 g/10 min, 0.891 g/cm³ density, melting point 108 °C, Vicat 105 °C, Tg -14 °C, a propylene-based plastomer / elastomer copolymer. In the VERSIFY propylene-based elastomer line-up this puts it in the higher-flow part of the range on the higher-melting, firmer side with relatively high Vicat heat resistance in the heat-resistant propylene-based group. Nearby grades include 3200 (MFR 8, 0.876 g/cm³, melting 85 °C) and 4200 (MFR 25, 0.876 g/cm³, melting 84 °C).
Choose it for PP modification, soft films, sealant layers and overmolding, where a propylene-based elastomer gives flexibility with PP compatibility. Compare Tg and melting point together: Tg sets low-temperature flexibility, the melting point sets the heat-seal and heat-resistance window. All values are typical figures from the Dow VERSIFY technical documentation — confirm against your specification and the batch COA before ordering.
Key properties
| Density | 0.891 g/cm³ | ASTM D792 |
| Melt flow rate (MFR) | 8.0 g/10 min | ASTM D1238 (230 °C / 2.16 kg) |
| Total crystallinity | 44 % | Dow Method |
| Tensile strength at break | 27.3 MPa | ASTM D638 |
| Tensile elongation at break | 730 % | ASTM D638 |
| Flexural modulus (1% secant) | 389 MPa | ASTM D790 |
| Shore A hardness | 96 | ASTM D2240 |
| Glass transition temperature (Tg) | -14.0 °C | Dow Method (DSC) |
| Vicat softening temperature | 105 °C | ASTM D1525 |
| Melting temperature (DSC) | 108 °C | Dow Method (DSC) |
| Haze | 9.10 % | ASTM D1003 |
Typical values from the Dow Technical Information sheet for VERSIFY 3000, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.
Typical applications
- Blown Film
- Cast Film
- BOPE
- BOPP
- Sealant
Processing
Typical conversion routes for VERSIFY 3000 include blown film, cast film, extrusion, thermoforming and injection moulding. Melt flow rate is measured at 230 °C / 2.16 kg; confirm the recommended processing window against the current official Dow data sheet before production.
Other VERSIFY grades
- Dow VERSIFY 2200
- Dow VERSIFY 2300
- Dow VERSIFY 2400
- Dow VERSIFY 3200
- Dow VERSIFY 3300
- Dow VERSIFY 3401
- Dow VERSIFY 4200
- Dow VERSIFY 4301
- Borealis Queo 0201 (POE grade reference)
- ExxonMobil Exact 9061
- Dow ENGAGE 8150
Data sheet & samples
Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.
Request official TDS · Request a sample · Get a quote
Supply
- Original 25 kg bags, lot traceable
- MOQ 25 kg, mixed container loading available
- Ex Shanghai; COA per batch, TDS and SDS on request
Data source: Dow (The Dow Chemical Company) published typical property data for VERSIFY 3000. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.