SABIC FORTIFY C30070D

SABIC FORTIFY C30070D is an ethylene-octene polyolefin elastomer with MFR 30.0 g/10 min, density 0.868 g/cm³ and a peak melting temperature of 62 °C, typically used for thermoplastic olefins.

0.868Density
30Melt Flow Rate (190 °C / 2.16 kg)
62Melting Point

Quick facts

Density0.868
Melt Flow Rate (190 °C / 2.16 kg)30
Melting Point62
Shore A Hardness68
Tensile Strength3.1
Elongation at Break1000
Flexural Modulus10.8
ComonomerOctene
SABIC FORTIFY C30070D | POE Pellets
SABIC FORTIFY C30070D | POE Pellets

SABIC FORTIFY C30070D is an ethylene-octene copolymer produced by solution polymerisation using a metallocene catalyst. It is a low-density, high-performance copolymer modifier supplied as free-flowing pellets.

Why c30070d and not its siblings

c30070d is a grade at MFR 30 g/10 min, 0.868 g/cm³ density, melting point 62 °C, an octene comonomer. In the FORTIFY POE line-up this puts it in the high-flow end of the range on the lower-melting, more flexible side. Nearby grades include c13060 (MFR 13, 0.863 g/cm³, melting 42 °C) and c13060d (MFR 13, 0.863 g/cm³, melting 42 °C).

Choose it for impact modification of PP/TPO, thermoplastic olefins and soft compounds, where very low density gives efficient rubber toughening. Select the MFR band to match your compounding or molding process, and check the melting point against the service temperature. All values are typical figures from the SABIC FORTIFY technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.868 g/cm³ASTM D1505
Melt flow rate (MFR)30.0 g/10 minASTM D1238
Mooney viscosity2 MUASTM D1646
Shore A hardness68ASTM D2240
Shore D hardness17ASTM D2240
Tensile strength at break3.1 MPaASTM D638
Elongation at break1000 %ASTM D638
Flexural modulus (1% secant)10.8 MPaASTM D790
Tear strength29.4 kN/mASTM D624
Peak melting temperature62 °C—

Typical values from the SABIC product data sheet for SABIC FORTIFY C30070D, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Thermoplastic olefins
  • Footwear
  • Impact modification

Processing

Typical conversion routes listed for this grade include injection moulding and compounding. All physical properties in the table were measured on specimens cut from moulded plaques; confirm the recommended processing window against the current official data sheet before production.

Other FORTIFY grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: SABIC published typical property data for SABIC FORTIFY C30070D. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need SABIC FORTIFY C30070D for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.