SABIC FORTIFY C1060D

SABIC FORTIFY C1060D is an ethylene-octene polyolefin elastomer with MFR 1.0 g/10 min, density 0.863 g/cm³ and a peak melting temperature of 46 °C, typically used for impact modification.

0.863Density
1Melt Flow Rate (190 °C / 2.16 kg)
46Melting Point

Quick facts

Density0.863
Melt Flow Rate (190 °C / 2.16 kg)1
Melting Point46
Shore A Hardness57
Tensile Strength5
Elongation at Break900
Flexural Modulus7.8
ComonomerOctene
SABIC FORTIFY C1060D | POE Pellets
SABIC FORTIFY C1060D | POE Pellets

SABIC FORTIFY C1060D is an ethylene-octene copolymer produced by solution polymerisation using a metallocene catalyst. It is a low-density, high-performance copolymer modifier supplied as free-flowing pellets.

Why c1060d and not its siblings

c1060d is a grade at MFR 1 g/10 min, 0.863 g/cm³ density, melting point 46 °C, an octene comonomer. In the FORTIFY POE line-up this puts it in the low-flow end of the range on the lower-melting, more flexible side in the very-low-density impact-modifier group. Nearby grades include c1055d (MFR 1, 0.857 g/cm³, melting 37 °C) and c3070 (MFR 3, 0.868 g/cm³, melting 62 °C).

Choose it for impact modification of PP/TPO, thermoplastic olefins and soft compounds, where very low density gives efficient rubber toughening. Select the MFR band to match your compounding or molding process, and check the melting point against the service temperature. All values are typical figures from the SABIC FORTIFY technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.863 g/cm³ASTM D1505
Melt flow rate (MFR)1.0 g/10 minASTM D1238
Mooney viscosity22 MUASTM D1646
Shore A hardness57ASTM D2240
Shore D hardness12ASTM D2240
Tensile strength at break5 MPaASTM D638
Elongation at break900 %ASTM D638
100% modulus1.8 MPaASTM D638
Flexural modulus (1% secant)7.8 MPaASTM D790
Tear strength31.4 kN/mASTM D624
Peak melting temperature46 °C—

Typical values from the SABIC product data sheet for SABIC FORTIFY C1060D, measured to the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Impact modification
  • Thermoplastic olefins
  • Footwear

Processing

Typical conversion routes listed for this grade include injection moulding and compounding. All physical properties in the table were measured on specimens cut from moulded plaques; confirm the recommended processing window against the current official data sheet before production.

Other FORTIFY grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: SABIC published typical property data for SABIC FORTIFY C1060D. Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need SABIC FORTIFY C1060D for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.