Mitsui TAFMER A-4050S — Data Sheet

Mitsui TAFMER A-4050S is a metallocene POE grade with density 0.864 g/cm³ and MFR 3.6 g/10 min (190 °C / 2.16 kg), typically used for general-purpose thermoplastic elastomers.

0.864Density
3.6Melt Flow Rate (190 °C / 2.16 kg)
56Shore A Hardness

Quick facts

Density0.864
Melt Flow Rate (190 °C / 2.16 kg)3.6
Shore A Hardness56
ComonomerPoly-alpha-olefin (PAO), propylene-based
Mitsui TAFMER A-4050S — Data Sheet
Mitsui TAFMER A-4050S — Data Sheet

Mitsui TAFMER A-4050S is a poly-alpha-olefin (PAO) polyolefin elastomer produced by Mitsui Chemicals. It is supplied in free-flowing pellet form; the values below are the typical properties published in the manufacturer technical data sheet for this grade.

Why a-4050s and not its siblings

a-4050s is a grade at MFR 3.6 g/10 min, 0.864 g/cm³ density, a poly-alpha-olefin (pao), propylene-based comonomer. In the TAFMER POE line-up this puts it in the distinct grade within this small TAFMER set. Nearby grades include df7350 (MFR 35, 0.87 g/cm³, melting 55 °C).

Confirm the exact TAFMER grade against your compound design, because the published property sets here are deliberately minimal — we supply the current TDS on request. All values are typical figures from the Mitsui TAFMER technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.864 g/cm³ASTM D1505
Melt flow rate (MFR, 190 °C / 2.16 kg)3.6 g/10 minASTM D1238
Melt flow rate (MFR, 230 °C / 2.16 kg)6.7 g/10 minASTM D1238
Mooney viscosity (ML 1+4)16 MUJIS K6395
Shore A hardness56ASTM D2240
Tensile strength at break> 3.00 MPaASTM D638
Elongation at break> 1000 %ASTM D638
Torsional rigidity2.00 MPaASTM D1043
Brittleness temperature< -70.0 °CASTM D746
Melting temperature< 50.0 °CASTM D2117
Volume resistivity> 1.0E+17 ohm·cmASTM D257
Dielectric constant2.20 to 2.40ASTM D150
Dissipation factor< 5.0E-4ASTM D150

Typical values from the Mitsui Chemicals technical data sheet, measured by the test methods shown. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • General-purpose thermoplastic elastomers
  • Soft-touch and flexible compounds
  • Impact modification
  • Wire & cable and automotive soft components

Processing

Typical conversion routes for Mitsui TAFMER A-4050S include compounding, extrusion, injection moulding and foam processing, depending on the end use. Melt flow rate is measured at 190 °C / 2.16 kg; confirm the recommended processing window against the current official data sheet before production.

Other TAFMER grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: Mitsui Chemicals TAFMER A-4050S Technical Data Sheet (typical values). Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need Mitsui TAFMER A-4050S — Data Sheet for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.