SK SOLUMER NX8605 — Data Sheet

SK SOLUMER NX8605 is a metallocene POE grade with density 0.860 g/cm³ and MFR 0.5 g/10 min (190 °C / 2.16 kg), typically used for general-purpose thermoplastic elastomers.

0.860Density
0.5Melt Flow Rate (190 °C / 2.16 kg)
63Shore A Hardness

Quick facts

Density0.860
Melt Flow Rate (190 °C / 2.16 kg)0.5
Shore A Hardness63
ComonomerEthylene-octene copolymer (metallocene, solution process)
SK SOLUMER NX8605 — Data Sheet
SK SOLUMER NX8605 — Data Sheet

SK SOLUMER NX8605 is a metallocene-catalysed polyolefin elastomer produced by SK Chemicals. It is supplied in free-flowing pellet form; the values below are the typical properties published in the manufacturer technical data sheet for this grade.

Key properties

Co-monomerOctene-1SK Method
Density0.860 g/cm³ASTM D1505
Melt flow rate (MFR)0.5 g/10 minASTM D1238
Shore A hardness63ASTM D2240
Shore D hardness19ASTM D2240
Tensile strength at break61 kgf/cm²ASTM D638
Elongation at break> 900 %ASTM D638
Tensile modulus (100%)19 kgf/cm²ASTM D638
Flexural modulus (1% secant)85 kgf/cm²ASTM D790
Tear strength (Type C)33 kgf/cmASTM D624
Mooney viscosity (ML 1+4 @ 121 °C)~ 45 MUASTM D1646 / SK Method

Typical values from the SK Chemicals technical data sheet, measured by the test methods shown. Mechanical properties are quoted in kgf/cm² as published by the manufacturer (1 kgf/cm² ≈ 0.0981 MPa). Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • General-purpose thermoplastic elastomers
  • Footwear (foamed and solid)
  • Impact modification of polyolefins
  • Flexible compounds

Processing

Typical conversion routes for SK SOLUMER NX8605 include compounding, extrusion, injection moulding and foam processing, depending on the end use. Melt flow rate is measured at 190 °C / 2.16 kg; confirm the recommended processing window against the current official data sheet before production.

Other SOLUMER grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data source: SK Chemicals SOLUMER NX8605 Technical Data Sheet (typical values). Full official TDS available on request; we do not host the manufacturer's PDF. These figures are typical values, not a specification or warranty.

Need SK SOLUMER NX8605 — Data Sheet for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.