SK Chemical 5990I - PRIMACOR

SK Chemical 5990I (PRIMACOR) ethylene acrylic acid (EAA) copolymer resin(EAA) — AA 20%, density 0.955 g/cm3, MFR 65. Supplied by POLYVALA with flexible MOQ and batch certificate.

0.955Density
65Melt Flow Rate
75Melting Point

Quick facts

Density0.955
Melt Flow Rate65
Melting Point75
SK Chemical 5990I - PRIMACOR | EAA / EMAA Copolymer Pellets
SK Chemical 5990I - PRIMACOR | EAA / EMAA Copolymer Pellets

SK Chemical 5990I is a ethylene acrylic acid (EAA) copolymer resin(EAA) supplied by POLYVALA (Shanghai Polyvala Plastics Co., Ltd.), part of the PRIMACOR family.

Why 5990i and not its siblings

5990i is a grade at MFR 65 g/10 min, 0.955 g/cm³ density, melting point 75 °C. In the EAA / EMAA copolymer line-up this puts it in the high-flow end of the range. Nearby grades include 5200 (MFR 38, 0.945 g/cm³, melting 90 °C) and 5080 (MFR 30, 0.937 g/cm³, melting 95 °C).

Match flow to the conversion route: lower-MFR grades suit thicker sections and extrusion where melt strength matters, higher-MFR grades suit coating and high-throughput extrusion. Compare the melting point and Vicat together, because they set the heat-seal and heat-resistance window. All values are typical figures from the EAA / EMAA technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.955 g/cm³—
Melt flow rate (MFR)65 g/10 min—
Melting point (Tm)75 °C—
Comonomer content20 %—

Typical values compiled from manufacturer published data and the grade technical documentation. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

End-use and conversion guidance for this grade is available on request; see the grade data above.

Processing

Conversion routes listed for this grade include extrusion coating. Confirm the recommended temperature profile against the current official TDS before production.

Other EAA grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data compiled from manufacturer published figures. Full official TDS available on request; we do not host the manufacturer's PDF.

Need SK Chemical 5990I - PRIMACOR for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.