SK Chemical 4608 - PRIMACOR

SK Chemical 4608 (PRIMACOR) ethylene acrylic acid (EAA) copolymer resin(EAA) — AA 6.5%, density 0.934 g/cm3, MFR 7.8. Supplied by POLYVALA with flexible MOQ and batch certificate.

0.934Density
7.8Melt Flow Rate
98.9Melting Point

Quick facts

Density0.934
Melt Flow Rate7.8
Melting Point98.9
Vicat Softening Point86.1
SK Chemical 4608 - PRIMACOR | EAA / EMAA Copolymer Pellets
SK Chemical 4608 - PRIMACOR | EAA / EMAA Copolymer Pellets

SK Chemical 4608 is a ethylene acrylic acid (EAA) copolymer resin(EAA) supplied by POLYVALA (Shanghai Polyvala Plastics Co., Ltd.), part of the PRIMACOR family.

Why 4608 and not its siblings

4608 is a grade at MFR 7.8 g/10 min, 0.934 g/cm³ density, melting point 98.9 °C, Vicat 86.1 °C. In the EAA / EMAA copolymer line-up this puts it in the higher-flow part of the range on the higher-melting, firmer side with relatively high Vicat heat resistance. Nearby grades include 3003 (MFR 7.8, 0.935 g/cm³, melting 100 °C) and 3460 (MFR 20, 0.938 g/cm³, melting 95 °C).

Match flow to the conversion route: lower-MFR grades suit thicker sections and extrusion where melt strength matters, higher-MFR grades suit coating and high-throughput extrusion. Compare the melting point and Vicat together, because they set the heat-seal and heat-resistance window. All values are typical figures from the EAA / EMAA technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.934 g/cm³—
Melt flow rate (MFR)7.8 g/10 min—
Melting point (Tm)98.9 °C—
Vicat softening temperature86.1 °C—
Comonomer content6.5 %—

Typical values compiled from manufacturer published data and the grade technical documentation. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • Foodflexible packaging:
  • Frozen / Packaging
  • Oil resistantPackaging pharmaceutical packaging:aluminum-plastic blister
  • Sterilization pouch
  • High-barrier pharma film :lithium-battery aluminum-plastic film inner layer composite:aluminum-plastic composite pipe
  • Cable shielding
  • Metal panelcoating
  • Photovoltaic backsheet :Packaging

Processing

Contact us for processing guidance and the recommended temperature profile for this grade.

Other EAA grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data compiled from manufacturer published figures. Full official TDS available on request; we do not host the manufacturer's PDF.

Need SK Chemical 4608 - PRIMACOR for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.