SK Chemical 3540 - PRIMACOR

SK Chemical 3540 (PRIMACOR) ethylene acrylic acid (EAA) copolymer resin(EAA) — AA 8.5%, density 0.936 g/cm3, MFR 7.0. Supplied by POLYVALA with flexible MOQ and batch certificate.

0.936Density
7Melt Flow Rate
98Melting Point

Quick facts

Density0.936
Melt Flow Rate7
Melting Point98
SK Chemical 3540 - PRIMACOR | EAA / EMAA Copolymer Pellets
SK Chemical 3540 - PRIMACOR | EAA / EMAA Copolymer Pellets

SK Chemical 3540 is a ethylene acrylic acid (EAA) copolymer resin(EAA) supplied by POLYVALA (Shanghai Polyvala Plastics Co., Ltd.), part of the PRIMACOR family.

Why 3540 and not its siblings

3540 is a grade at MFR 7 g/10 min, 0.936 g/cm³ density, melting point 98 °C. In the EAA / EMAA copolymer line-up this puts it in the higher-flow part of the range on the higher-melting, firmer side. Nearby grades include 3003 (MFR 7.8, 0.935 g/cm³, melting 100 °C) and 3460 (MFR 20, 0.938 g/cm³, melting 95 °C).

Match flow to the conversion route: lower-MFR grades suit thicker sections and extrusion where melt strength matters, higher-MFR grades suit coating and high-throughput extrusion. Compare the melting point and Vicat together, because they set the heat-seal and heat-resistance window. All values are typical figures from the EAA / EMAA technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.936 g/cm³—
Melt flow rate (MFR)7 g/10 min—
Melting point (Tm)98 °C—
Comonomer content8.5 %—

Typical values compiled from manufacturer published data and the grade technical documentation. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • High barrierPackaging: EVOH/PA multilayer composite
  • Retort resistant / sterilization pouch
  • Meat products / dairy products / condiment packaging pharmaceutical packaging:aluminum-plastic blister
  • Pharmaceutical composite film
  • Sterilization packaging
  • High-barrier pharma film / :lithium-battery aluminum-plastic film
  • Cable shielding
  • Metal panel lamination

Processing

Conversion routes listed for this grade include lamination. Confirm the recommended temperature profile against the current official TDS before production.

Other EAA grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data compiled from manufacturer published figures. Full official TDS available on request; we do not host the manufacturer's PDF.

Need SK Chemical 3540 - PRIMACOR for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.