Success Case

Lightweight Weather-Sealing with POE Elastomers

How a European automotive Tier-2 supplier qualified POE-based compounds for door and window seals — holding weatherability while simplifying part consolidation.

Lightweight Weather-Sealing with POE Elastomers

Project Details

Background

A European automotive Tier-2 supplier reviewed the material used for door, window and trunk weather-seals. The incumbent EPDM compounds met weatherability targets but added weight and relied on energy-intensive curing.

What we supplied

We shortlisted POE-based thermoplastic elastomer grades offering a balance of compression set, UV stability and low-temperature flexibility, with TDS and COA supplied for every lot.

Outcome

The qualified POE compounds maintained sealing performance across the required temperature range while supporting lighter, simpler seals. (Sample case study — replace with a verified customer project.)

About This Article

This guide is prepared by the POLYVALA technical team. All property values, test methods and compliance statements are drawn from manufacturer Technical Data Sheets (TDS) and recognized standards (ASTM, ISO). Figures must always be confirmed against the current official TDS and the lot-specific Certificate of Analysis (COA) before production qualification.

References

  • Manufacturer Technical Data Sheets (TDS) for the grades referenced above.
  • ASTM D1238 / ISO 1133 — Melt flow rate (MFR/MFR) of thermoplastics.
  • ASTM D1505 / ISO 1183 — Density of plastics by the density-gradient technique.
  • ASTM D638 — Tensile properties of plastics.

About This Case

2026-10-25


If you are interested in this solution or have similar needs, please contact our expert team.

Request Quote
Back to All Cases