ExxonMobil Exxtra 8409

ExxonMobil Exxtra 8409 (formerly Escor 5050) EAA copolymer pellets — 9% acrylic acid, 8.4 g/10min MI, 0.936 g/cm3 — high-adhesion resin for multilayer packaging, foil lamination and extrusion coating.

0.936Density
8.4Melt Flow Rate
97Melting Point

Quick facts

Density0.936
Melt Flow Rate8.4
Melting Point97
ExxonMobil Exxtra 8409 | EAA Copolymer Pellets
ExxonMobil Exxtra 8409 | EAA Copolymer Pellets

ExxonMobil Exxtra™ 8409 is an ethylene-acrylic acid (EAA) copolymer supplied by POLYVALA (Shanghai Polyvala Plastics Co., Ltd.). It is the current grade of the former Escor™ 5050 — ExxonMobil has renamed the EAA family to Exxtra™ and updated the packaging, with 8409 as the successor grade. The resin carries 9% acrylic acid, giving strong adhesion to aluminium foil, steel, paper and polar polymers, with good low-temperature heat-sealing and stable high-speed coating.

Why exxtra-8409 and not its siblings

exxtra-8409 is a grade at MFR 8.4 g/10 min, 0.936 g/cm³ density, melting point 97 °C. In the EAA / EMAA copolymer line-up this puts it in the higher-flow part of the range on the higher-melting, firmer side. Nearby grades include 3004 (MFR 8.5, 0.938 g/cm³, melting 98 °C) and 5080 (MFR 30, 0.937 g/cm³, melting 95 °C).

Match flow to the conversion route: lower-MFR grades suit thicker sections and extrusion where melt strength matters, higher-MFR grades suit coating and high-throughput extrusion. Compare the melting point and Vicat together, because they set the heat-seal and heat-resistance window. All values are typical figures from the EAA / EMAA technical documentation — confirm against your specification and the batch COA before ordering.

Key properties

Density0.936 g/cm³—
Melt flow rate (MFR)8.4 g/10 min—
Melting point (Tm)97 °C—
Comonomer content9.0 wt%—

Typical values compiled from manufacturer published data and the grade technical documentation. Indicative only — not a specification or warranty. Confirm the current grade data and the batch COA with us before ordering.

Typical applications

  • High-end flexible packaging
  • Multilayer co-extrusion
  • Aluminium-foil lamination
  • Extrusion coating
  • Industrial composite structures — anywhere a durable acid-copolymer bond
  • A low sealing temperature are needed.

Processing

Conversion routes listed for this grade include extrusion coating, co-extrusion, lamination. Confirm the recommended temperature profile against the current official TDS before production.

Other EAA grades

Data sheet & samples

Official TDS, SDS and a batch COA are available on request. We publish the grade data above as plain HTML rather than hosting the manufacturer PDF; see our data sheet policy.

Request official TDS  ·  Request a sample  ·  Get a quote

Supply

  • Original 25 kg bags, lot traceable
  • MOQ 25 kg, mixed container loading available
  • Ex Shanghai; COA per batch, TDS and SDS on request

Data compiled from manufacturer published figures. Full official TDS available on request; we do not host the manufacturer's PDF.

Need ExxonMobil Exxtra 8409 for your project?

Send your spec — we reply with TDS, samples and pricing.

Data source & disclaimer. Typical values are taken from manufacturer technical data sheets and tested per the methods shown; they are for material selection only and are not a specification or warranty. The full official TDS is available on request; POLYVALA does not host or reproduce the manufacturer's PDF. © 2026 POLYVALA.